Roland Versa Camm VS-540

Inks are available! (CLICK ME)

 

Enter the Metalic World

The VersaCAMM VS-300 is printer/cutter that feature up to eight colours, including metallic silver and white. When you combine the metallic ink with CMYK, you can create over 500 metallic colours. These colours give your prints a luxurious and eye-catching look. 

The VS-300 is a great production tool for stickers, labels and apparel heat transfers. You can install an automated take-up system on all VS machines. This allows you to produce large print jobs without any problems.

Metalic Revolution

With the additional of  Metalic Silver ink, you can easily apply luxurious effect to printed graphic with brilliant metalic colours that were previously available only through silk screening, offset printing, and hot stamping. The design possibilities are boundless with the rich textures and smooth gradations of gold, silver, metalic and pearlescent colours. A choice of four inkjet printer / cutter sizes provide a wide variety of cost-effective options. 

 

Specifications  VS-640 VS-540 VS-420 VS-300
Printing technology Piezoelectric inkjet
Media Width 210 to 1625 mm 210 to 1372 mm  182 to 1071 mm 182 to 762 mm 
Thickness Maximum 1.0 mm with liner for printing
Maximum 0.4 mm with liner and 0.22mm without liner for cutting
Roll outer diameter Maximum 210 mm
Roll weight Maximum 40 kg Maximum 30 kg  Maximum 25 kg Maximum 25 kg
Core diameter *1 76.2 mm or 50.8 mm
Printing/cutting width *2 Maximum 1600 mm Maximum 1346 mm Maximum 1046 mm Maximum 736 mm 
Ink cartridges Type Roland ECO-SOL MAX ink
Capacity 220 cc or 440 cc
Colours Eight colours (cyan, magenta, yellow, black, light cyan, light magenta, metallic silver and white), six colours (cyan, magenta, yellow, black, light cyan, and light magenta), or four colours (cyan, magenta, yellow, and black)
Printing resolution (dots per inch) Maximum 1440 dpi
Cutting speed 10 to 300 mm/s
Blade force 30 to 300 gf
Blade offset 0 to 1.5 mm
Software resolution (when cutting) 0.025 mm/step
Distance accuracy (when printing) *3 *4 Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater
Distance accuracy (when cutting) *3 Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater
When distance correction has been performed (when the setting for [CUTTING MENU] - [CALIBRATION] has been made):  Error of less than ±0.2% of distance travelled, or ±0.1 mm, whichever is greater
Repeatability (when cutting) *3 *5 ±0.1 mm or less
Alignment accuracy for printing and cutting *3 *6 ±0.5 mm or less
Alignment accuracy for printing and cutting when reloading media *3 *7 Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater
Media heating system *8 Print heater Setting range for the preset temperature: 30 to 45°C
Dryer Setting range for the preset temperature: 30 to 50°C
Connectivity Ethernet (10BASE-T/100BASE-TX, automatic switching)
Power-saving function Automatic sleep feature
Power requirements AC 100 to 120 V ±10%, 8.2A, 50/60 Hz or  AC 100 to 120 V ±10%, 7.9A, 50/60 Hz or  AC 100 to 120 V ±10%, 7.2A, 50/60 Hz or  AC 100 to 120 V ±10%, 5.6A, 50/60 Hz or 
AC 220 to 240 V ±10%, 4.2A, 50/60 Hz AC 220 to 240 V ±10%, 4.0A, 50/60 Hz AC 220 to 240 V ±10%, 3.7A, 50/60 Hz AC 220 to 240 V ±10%, 2.9A, 50/60 Hz
Power consumption During operation Approx. 1080 W Approx. 1050 W Approx. 960 W Approx. 740 W
Sleep mode Approx. 14.8 W Approx. 14.4 W Approx. 14.5 W Approx. 14.4 W
Acoustic noise level During operation 64 dB (A) or less
During standby 41 dB (A) or less
Environmental Power on Temperature: 15 to 32°C [20°C or more recommended], Humidity: 35 to 80%RH (no condensing)
Power off Temperature: 5 to 40°C, humidity: 20 to 80%RH (no condensing)
Dimensions (with stand) 2575 (W) x 705 (D) x 1105 (H) mm  2315 (W) x 705 (D) x 1105 (H) mm 2015 (W) x 705 (D) x 1105 (H) mm 1075 (W) x 705 (D) x 1105 (H) mm 
Weight (with stand) 130 kg 120 kg 105 kg 90 kg 
Included items Stand, power cord, blade, blade holder, media clamps, media holder, replacement blade for separating knife, software RIP, user's manual, etc.

*1 The media holder of this machine is exclusively for media with a paper tube core inner diameter of 3 inches. To use a 2 inch media core, please use the optionally available media flanges. 
*2 The length of printing or cutting is subject to the limitations of the program. 
*3 Using Roland specified media, loaded correctly, temperature: 25°C, humidity: 50 %RH, all pinch rollers are used, 25 mm or more for both right and left margins and 35 mm or more front margin, excluding expansion or contraction of the media. and all correction and adjustment functions of this machine have been made properly. Not assured when the print heater or dryer is used. 
*4 Using Roland specified media, print travel of 1m 
*5 [PREFEED] menu item must be set to ""ENABLE,"" 64-inch and 54-inch models, media over 610 mm wide, and 4000 mm long. Media 610 mm wide or less and 8000 mm long. 42-inch and 30-inch models, 3000 mm long.
*6 Provided that media length is under 3000 mm. Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media. 
"*7 Using Roland specified media, 64-inch and 54-inch models: data size: 1000 mm in the media-feed direction, 1600 mm in the carriage-movement direction. 42-inch model: data size: 1000 mm in the media-feed direction, 1346 mm in the carriage-movement direction. 30-inch model: data size: 1000 mm in the media-feed direction, 736 mm in the carriage-movement direction.
No lamination. Automatic detection of crop marks at 4 points when media is reloaded. During cutting, [PREFEED] menu item must be set to ""ENABLE."" Excludes the effects of slanted movement and of expansion and contraction of the media. " 
*8 Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment. The preset temperature may fail to be reached depending on the ambient temperature and media width.

Roland VersaWorks System Requirements
Operating system Windows® 7 Professional or Ultimate (32-bit);
Windows Vista® Business/Ultimate Service Pack 1 (32-bit); Windows Vista® Business/Ultimate (32-bit);
Windows® XP Professional Service Pack 2 or later; or Windows® 2000 Service Pack 4
CPU CoreTM2 Duo, 2.0 GHz or faster recommended
RAM 1 GB or more recommended (Windows 7 and Vista: 2 GB or more recommended)
Video card and monitor A resolution of 1280 x 1024 resolution or more recommended
Free hard-disk space 40 GB or more recommended
Hard-disk file system NTFS format
Optical drive DVD-ROM drive 

 

Application software
Adobe® Illustrator® 10, CS, CS2, CS3
CorelDRAW® 11, 12, X3

 

Lead time : 6 to 8 weeks depending on avaibility

Related products